Click image to view full size image
Machine type: ROT-3
Design standard as per: ISO 16833: 2006 Road vehicles _ Wheels _ Measurement of radial and lateral run-out
Machine application: This measurement machine is used to measure the radial and axial run-out of wheel and analyze the harmonic wave.
Technical parameters:
Wheel nominal diameter: 16"~25"
Wheel nominal width: 5"~14"
Center hole diameter: φ 160, φ 221, φ 28
Radial measuring accuracy solution: ≤ 0.2 mm
Machine repeatability accuracy: 0.05mm
Load cell capacity: ± 10 mm
Machine Position method: Floating cone style
Checking method: Hard roller (Steel GCr15) in the contacting way.
Sensor slide plate moving: Done by pneumatic part.
Sensor moving: Done by pneumatic part
Main shaft rotating drive: Manual
Wheel tightening: Manual
Power consumption: <1 kw
Compressed air: 0.4~0.6MPa
PC deals with data saving, statistics, and printing.
Display of first and second harmonic wave
Main machine weight: about 800kg
Main machine dimension: 1350 mm× 610 mm× 1350 mm
Wheel Run-out Measuring Machine
